Following on from my recent post about combining shibori dyeing and eco-printing on wool, here are some similar effects achieved on cotton. I really enjoy combining organic eco-prints with geometric grids or lines from shibori dyeing methods.
This pattern was created by folding the tshirt up into a small bundle, adding liquidambar and Japanese maple leaves as I went. Then I tied it tightly with string and submerged it in a dye bath of eucalyptus bark and iron, cooking it for about 1 hour. The fabric was mordanted with homemade iron and alum mordants, following the instructions in my ebook, Gum Leaf Alchemy.
Here is a close up of a similar pattern, this time with eucalyptus leaves and an iron mordant. The large section of lines show which part of the tshirt ended up on the outside of the bundle, wrapped tightly with string. There are smaller sections of lines where other parts of the tshirt were also on the outside of the bundle, because of how it was folded.
This long-sleeved tshirt was also folded up, but into a smaller bundle which was pressed between two square pieces of hardwood. This helped to create a very even, geometric pattern to contrast with the organic shape of the leaf prints. This piece was also mordanted with iron and alum.
This piece of fabric was mordanted with iron, covered in rose leaves and folded into large squares. I pressed the fabric between 2 tiles, clipped the tiles together then submerged the bundle in a dye bath and cooked it.
If you would like to come back to this idea later, you can pin the below image.