Eco-printing on paper is a fun and easy way to introduce children to the wonders of natural dyeing or to get started with it yourself. Here’s a tutorial for one particular method, using autumn leaves. Autumn leaves print particularly well because they are high in tannins and carotenoid and anthocyanin pigments, which all give colour. But you could also try this process at any time of year, with any leaves that you have around you (results will obviously vary).
- Strips of watercolour paper
- Wood blocks or tiles to press the paper between
- Autumn leaves- especially red and purple. I used maple, liquidambar and claret ash
A simple method for eco-printing on paper
Fold your paper into a concertina booklet, slightly smaller than the blocks or tiles you are using. Wet it lightly, then arrange the leaves on each page.
Fold your paper up with the leaves inside. You can also put a leaf on the front and back covers. Then press between the wood blocks or tiles.
Wrap your wood blocks with string to hold the bundle together. You want firm pressure so that each leaf is pushed into the paper, to make a clear print. With tiles, you can clamp them together with bulldog clips.
Once your bundles are wrapped, put them in a pot of boiling water and simmer for 45 minutes to 1 hour. It is always best to use a dedicated dyepot, not one you also use for cooking. If the wood blocks float, weigh them down with a rock.
Let them cool, then carefully unwrap, remove the leaves and let the paper dry.
If you want to learn further eco-printing on paper techniques, or find out about more types of leaves that will give good prints, have a look at my eco-printing on paper ebook, Plant Poetry. Or if you want to return to this project later, you can pin the below image.